Auto Ranging LCD Meter  (220-0184)  Specifications    Faxback Doc. # 8215


Display:                    3-1/2 Digit, LCD

Ranges & Accuracy 

DC VOLTS
  200mV-2-20-200-2000V      +-0.8% of reading and
  (Maximum Measurement      +-0.5% of full scale,
  = 1000 Volts):            +- 1 in last digit

AC VOLTS
  2-20-200-2000V            +-1% of reading and
  (Maximum Measurement      +-0.5% of full scale,
  = 750 Volts RMS)          +- 1 in last digit
  at 50/60 Hz:

  40 Hz to 500 Hz           +-1.5% of reading and
  at 20 Volt Range:         +-0.5% of full scale,
                            +-1 in last digit

DC CURRENT
  200mA-20A                 +-1.5% of reading and
  (Maximum measurement      +-0.2% of full scale,
  = 10A):                   +-1 in last digit

AC CURRENT
  200mA-20A                 +-1.5% of reading and
  (Maximum measurement      +-035% of full scale,
  =10A):                    +-1 in last digit

RESISTANCE

  200ohm-                   +-1.5% of reading and
  2-20-200-2000k ohm:       +-0.2% of full scale,
                            +-1 in last digit

Continuity Function:        Continuity buzzer sounds at
                            less than nominal 300 ohm
                            (+-50 ohm) input resistance.

Diode Check Function:       For checking semiconductors:
                            open, shorted, or normal.

Input Impedance:            10 Megohm (DCV/ACV).
                            More than 100 Megohm on
                            200mV DC scale.

Range Control:              Full autorange or manual
                            range control, selectable by
                            [MANUAL/AUTO] switch.

Power Source:               Two AA size 1.5V batteries.

Power Consumption:          5mW typical

Low Battery Indication:     "BATT" on the left of display
                            indicates when [+] or [-]
                            supply is below 1.3V.

Polarity:                   Automatic polarity

Overrange Indication:       1000 with blinking 1"
                            When the measured value,
                            exceeds the maximum value.
                            all digits on display blink.

Operating Temperature:      32F to 122F (0C to 50C)

Storage Temperature:        -4F to 140F (-20C to 60C)

Weight:                     7.97 oz. (226g)

Size:                       6-1/8 x 3-1/16 x 1-1/4 inches
                            (156 x 78 x 32 mm)

Accessories:                Fuse (0.315A/250V) x 2
                            Banana type test leads
                            (Cat. No. 278-704)

(RLR-10/01/93)