Trunk Mount Amplifier (120-1967) Features Faxback Doc. # 8295 Your Realistic Trunk Mount Amplifier is designed to give added punch and power to your automobile's existing stereo system. The amplifier produces up to 170 watts of clean, powerful sound at all audio frequencies with minimum distortion. Other features include: FULL MOSFET POWER SUPPLY - produces enough power to supply the main amplifier and has a considerable amount of reserve power for peak "high demand" situations. AUTOMATIC POWER SWITCHING - powers the amplifier when you turn on/off your automobile's stereo system. NOISE-ISOLATED LINE-LEVEL AND RCA-TYPE INPUT JACKS - accept either high- or low-level signals as input. This lets the amplifier match your stereo system's output for the best high- fidelity performance. INPUT LEVEL CONTROL - lets you adjust the line or speaker input level to match your audio system's output level. 14K GOLD-PLATED COLOR SPEAKER TERMINALS - have high conductivity and minimum impedance. POWER INDICATOR - lights when power is on. BRIDGING CAPABILITY - lets you combine the left and right channels in the amplifier to provide a single 170-watt channel. AUTOMATIC THERMAL PROTECTION SYSTEM (ATPS) - automatically lowers the amplifier's output power when the amplifier's internal temperature reaches 202 degrees Fahrenheit, then increases the output power when the amplifier cools down. SHORT CIRCUIT PROTECTION - distorts sound if any output channel shorts. BASS/TREBLE TONE CONTROL - lets you boost the bass response by 8 db at 100 Hz and 10 kHz. MUTE TURN ON CIRCUIT - eliminates the irritating thump noise that some amplifiers make when you turn them on. WARNING: If the connectors on your vehicle or automobile's stereo system are not compatible with the amplifier's connectors, contact your local Radio Shack store. Radio Shack stores sell adapter harnesses for many vehicles. Do not modify the amplifier's wiring as this voids its warranty. (tlc/all-09/15/94)