10-Band Equalizer  (310-2025)        Specifications     Faxback Doc. # 8416

Frequency response (flat Setting)........5 to 50,000 Hz +
............................................0.5 dB-1.0 dB
Control Ranges..........+/-12 dB at 31, 62, 125, 250, and
................................at 1, 2, 4, 8, and 16 kHz
Intermodulation Distortion......0.2% at 1 Volt Putput (70
......................................Hz/7 kHz=4/1 Ratio)
Harmonic Distortion...........0.015% at 1 Volt Output (20
........................................... Hz-20,000 Hz)
Hum and Noise (Shorted Input)....95 dB (At 1 Volt Output)
Hum and Noise (All Control Max,......................1 mV
Input=4.7 K ohms Terminated)
Channel Separate at 1 kHz (Input....................62 dB
    0.775 Volts and 4.7 ohms Terminated)
Crosstalk between Functions at......................70 dB
    1 kHz (Input 0.775 Volts and 4.7 ohms Terminated)
Level Ratio Main Channel at Expander:
  VR Max....................L Channel 8 dB, R Channel 8 dB
  VR Min................L Channel 4.5 dB, R Channel 4.5 dB
Expander Noise Level at Expander VR Max.............0.5 mV
    (Input 4.7 ohms Terminated)
Dynamic Range (Flat Setting)............Up to 10 Volts RMS
Total Gain (Flat Setting)............................Unity

SPECTRUM DISPLAY
Control Frequency Accuracy at 31 Hz-16 kHz.........+/- 10%
Display Frequency Response at Main 31Hz,...........+/-2 db
     1kHz=0 dB (18dB LED on Position)
Meter Tolerance at 1 kHz LED on Position...........+/-2 dB
Input Sensitivity MAIN IN at dB on Position..........75 mV

GENERAL
Inputs.......................MAIN IN, TAPE 1 IN, TAPE 2 IN
Outputs...................MAIN OUT, TAPE 1 OUT, TAPE 2 OUT
Power Requirements.....................120 Volts AC, 60 Hz
Dimensions
 Cabinet............................23/4x161/2x81/2 Inches
 Overall...........................31/4x161/2x91/16 Inches
Weight.......................................6 lbs. 1.6 oz

(RLR-10/13/93)