Digital Multimeter  (220-0182)          Features        Faxback Doc. # 8665

INTRODUCTION

The MICRONTA LCD Digital Multimeter is a portable 3-1/2 digit, compact-
sized test instrument ideally suited for use in the field, lab, shop,
and home.  Here are some of the professional features of your new digital
multimeter.

FEATURES

Computer Interface & Software - Let you interface the meter with your PC-
                                compatible computer so you can log
                                measurements.

     Frequency Check Function - Measures frequencies up to 200 kHz.

    Transistor Check Function - Measures gain hFE of small-signal bipolar
                                transistors and identifies pin-out and
                                type.

     Capacitor Check Function - Measures the capacitance of low-voltage
                                capacitors.

      Analog Bargraph Display - Indicates the magnitude of the input
                                compared to the full-scale value of the
                                measurement range.

        Max/Min Hold Function - Stores a maximum and minimum measured
                                value memory.

           Data Hold Function - Freezes the display so you can keep the
                                measured value on the display even after
                                you disconnect the probes.

              Relative Offset - Stores a value in memory and displays the
                                difference between the stored value and
                                subsequent readings.

          Continuity Function - Makes it easy to check fuses, alarm
                                wiring, cables, and connections.

      Auto-Polarity Operation - Protects your meter and gives valid
                                measurements when you connect the leads in
                                reverse polarity.

         Diode Check Function - Safety checks semiconductor junctions for
                                open, short, or normal.

  Combined Function and Range - Makes it easy for you to use your meter.
  Selector Switch

        Latest IC and Display - Ensures reliability, accuracy, stability,
        Technology              and ease of operation.

          Auto Power Shut-off - Helps conserve battery power.

                       Beeper - Sounds tones for overload-warning,
                                continuity function, range selection, and
                                end of self-test.

          Logic Test Function - Checks logic levels without extra probes.

       Overload and Transient - Helps protect the meter from accidental
       Protection               overload on most ranges.

        Low-Battery Indicator - Appears when you need to replace the
                                batteries.

             Memory Recording - Stores five measurements which you can
                                download to a computer.

                    UL Listed - Passes the stringent tests required by
                                Underwriters Laboratories for safety.

Cautions:  Completely read this manual before you use the meter.

           If you are not familiar with meters and testing procedures, we
           suggest you obtain and read a book about the subject, such as
           "Using Your Meter" (Radio Shack Cat. No. 62-2039).

(lb/all-9/19/94)