Sound Level Meter  (330-2055)  Features                 Faxback Doc. # 8719

Your new Realistic Digital Sound Level Meter precisely measures area noise
and other sound levels.  The meter's digital design and special measuring
features, such as the bargraph and data hold, ensure pinpoint accuracy for
checking any acoustic environment.  The meter is lightweight and easy to 
operate.

Your meter also has these features:

3-Digit Liquid Crystal Display - Makes it easy to read sound measurements.  

21-Dot Analog Bargraph - Gives you a visual representation of the measured 
                         sound.

Mode/Condition Indicators - Show you the current mode and status of the 
                            meter.

Wide Sound-Measuring Abilities - Measures from 50 dB to 126 dB SPL with 
                                 seven Ranges.

Average or Maximum Sound Level Display - Continuously shows the average or 
                                         maximum sound level: per second 
                                         with digits, per 0.2 or 0.5 
                                         seconds with the bargraph.

Tripod Ready - Lets you attach the meter to a tripod (1/4-inch) for more 
               accurate sound measurements.

Data Hold - Lets you freeze a measurement on the display.

Integrated Averaging - Measures the integrated average, and holds the 
                       maximum and minimum sound levels for a preset period.

Underrange and Overrange Indicators - Show you when the sound level reading
                                      is under or over the selected range.  

A and C Weighting - Lets you select either type of weighting to suit the 
                    purpose of the measurement.  

Selectable Bargraph Response - Lets you select a slow (0.5 second) or fast 
                               (0.2 second) bargraph response.

Peak Level Indication - Shows you when the meter registers the maximum 
                        level measurement on the bargraph.  

Reset Button - Lets you clear the current measurements from the meter's 
               memory and begin a new measurement.

9-Volt Battery Operation - Lets you power the meter with a 9-volt battery.

Phono Output Jack - Lets you connect the meter to your stereo system or 
                    test equipment.

Low-Battery Indicator - Shows you when the battery needs to be replaced.

(smc-03/04/94)