TRC-493  (210-1590)         Optional Equipment          Faxback Doc. # 8899

CONNECTING OPTIONAL SPEAKERS

You can connect your transceiver to an external CB speaker or PA (public-
address) speaker.

CONNECTING AN EXTERNAL CB SPEAKER

Any external CB speaker you use with the transceiver should have an
impedance of 8 ohms and be able to handle 3 to 10 watts of power (such as
Radio Shack Cat. No. 21-549).  The speaker cable must have an 1/8-inch
plug.

To connect the external speaker to the transceiver, insert the speaker
cable's plug into the transceiver's EXT SPKR jack.

Set CB/PA to CB whether you use the internal or an external CB speaker.

Note:  When you connect an external CB speaker, you disable the
transceiver's internal speaker.

CONNECTING A PA SPEAKER

You can also connect a PA speaker to the transceiver and use the CB as
a public-address system.  The PA speaker should have an impedance of 8 ohms
and be able to handle at least 5 watts of power (such as Cat. No. 40-1236).
The speaker cable must have a 1/8-inch plug into the transceiver's
PA SPKR jack.

Set CB/PA to PA to use the CB as a PA system.

(SMC-03/03/94)