Remote Control  (490-0796)     Setting The Security Code     Faxback Doc. # 8941
Alarm System

The security code helps eliminate false triggering by similar systems.  You
set the security code in the control module for the paper and the remote
arm/disarm transmitter.

SETTING THE TRANSMITTER'S CODE

Set the transmitter's code as shown.

1.  Set the control module's five dip switches to any combination of 0,
    1, and 2.

Note:  Do not set the switches to all one position.

2.  Remove the screws from the back of the transmitter and lift off the
    back.

3.  Set the dip switches to the same settings as in the control module.

4.  Replace and secure the back of the transmitter with the screws.

(SMC/jlc-03/22/94)