Remote Control  (490-0796)        Install Sensor        Faxback Doc. # 8947
Alarm System

Clean a mounting surface under the dashboard or on the console with soap
and water.  Let the area dry.  Then, remove the sensor's adhesive
sticker's cover and press the sensor onto the dashboard or console, or
secure the sensor with a screw.

CONNECT THE OMNI-DIRECTIONAL SENSOR

To connect the omni-direction sensor do the following:

1.  Connect the sensor's black wire with spade connector to a metal point
    on your car frame or directly to the battery's negative (-) terminal.

2.  Connect the black cable's white wire to the control module's Terminal
    3, red wire to Terminal 7, and black wire to Terminal 9.

3.  Connect the blue wire to the control module's Terminal 10.

Note:  You now have two wires connected to Terminals 3, 7, and 9.  You
       might have a gray wire also connected to Terminal 10.

(SMC/jlc-03/22/94)