TandyFax 1505  (430-1216)        Memory Dialing         Faxback Doc. # 8960

You can store up to 50 fax and/or voice numbers in the Autodialer of the
TANDYFAX 1505.  These numbers can be dialed by entering 2-digit code
numbers.

For each code number, you can enter a fax or voice number, and a name.

Storing Numbers

* Notes

*  You may need to add a pause between certain numbers to allow time for
   connection.  For example, if you are on a PBX telephone system that
   requires an access number to be dialed (such as "9") to access an
   outside line, you will need to enter a pause between the access number
   and the number of the receiving fax machine.

*  Pauses are entered by pressing the REDIAL/PAUSE key.  Each pause gives
   a time of delay of about 2 seconds.  If necessary, several pauses can be
   entered in a row.

Step     Press these keys:       Comments

1        FUNCTION   3            Enter ENTRY MODE.

2        #                       Scroll down to FAX/TEL # MODE

3        1                       Press "1" to select SET.

4        0  1                    Enter a 2-digit number (from 01 to 50)
         (example)               This will be the code number.

5        5 5 5 1 2 3 4           Enter the fax or voice number
         (Example)               using the numeric keys.

6        START/COPY              Press START/COPY.

7        ABC..DEF..GHI..WXY      Enter the name of the location or party
          2    3    4    9       (max. of 20 characters).(See the first
         (Example)               section of this chapter).  If you don't
                                 want to enter a name, skip this step.

8        START/COPY              Press START/COPY.

9        STOP                    You can now make entries for a new number
                                 (go back to Step 4), or press STOP to exit
                                 ENTRY MODE.

Using a pencil, write the telephone number (or the name) which you have
programmed in the space provided above the respective key.

Caution:

*  Avoid frequent erasure of this number, as eraser particles may enter the
   cracks between the key and the panel, causing key malfunction.  In
   addition, frequent erasure will dull the luster of the panel surface.

*  Do not use writing utensils with hard or sharp tips such as ball-point
   pens.  These may damage the panel surface.

CLEARING NUMBERS

Step     Press these keys:       Comments

1        FUNCTION   3            Enter ENTRY MODE.

2        #                       Scroll down to FAX/TEL.# MODE.

3        2                       Press "2" to select CLEAR.

4        0   1                   Enter the code number which you
         (Example)               want to clear using the numeric
                                 keys.

5        START/COPY              Press START/COPY to clear the number.

6        STOP                    Return to Step 4 to clear another
                                 number, or press STOP to exit ENTRY MODE.

CHANGING NUMBERS

To change Rapid Key or Speed Dial number entries previously made, repeat
the storing procedure.  Select the Rapid Key or Speed Dial number for
which you want to make changes in Step 4, and then change the number and/
or name when they appear in the display (Step 5 and 7, respectively).

(smc-03/02/94)