CT-102/103/104/1030/1033 (17-1076/1077/1078/1020/1006)    Faxback Doc. 9006

Dual-NAM Programming Instructions

STEP 1 (Enter Program Mode):

Type:   *3001#12345 <SEL> 9    Phone Responds:  InStALL
Type:   <END>                  Phone Responds:  IdEnt IF InFO Pri
Type:   <END>  (see Note 1)    

 Note 1: If you wish to program the phone for a 2nd cellular phone number,
         press <SND> BEFORE pressing <END>. At this point the phone will 
         display "OPt InFO dISAbLEd". Now type: <SND> and then <END>. 
         You may now continue with Step 2 as normal.

STEP 2 (Programming the Primary NAM information):

The phone will now inform you of the parameter it wants you to enter on the
top line with the previously programmed parameter (or factory default) on
second line. The starred (*) lines require information that MUST be
supplied by the cellular carrier.

*Line 1 of Phone: HO- Id     Type:  5-digit Home System ID then <END>
 Line 1 of Phone: ACCESS     Type:  <SND> IF line 2 displays: 0  then <END>
 Line 1 of Phone: LOCL OPt   Type:  <SND> IF line 2 displays: 0  then <END>
*Line 1 of Phone: Phon       Type:  10-digit phone number then <END>
 Line 1 of Phone: ST CLASS   Type:  0 8 then <END>
*Line 1 of Phone: PAging Ch  Type:  4-digit Paging Channel then <END>
                                    (Note: Channel A is: 0333,
                                           Channel B is: 0334)

Line 1 of Phone: O-LOAd CLASS Type:  0 and last digit of phone # then <END>
Line 1 of Phone: PrEF SYS     Type:  <SND> to toggle between "A" and "B",
                                      then <END> 
                                      (Note: A if PAging Ch is 0333,
                                             B if PAging Ch is 0334)

*Line 1 of Phone: grOUP Id     Type:  2-digit Group ID then <END>
 Line 1 of Phone: SECUrIty     Type:  5-digit Security Code then <END>
 Line 1 of Phone: 1 dAtE       Type:  <END> (Do NOT change this)
 Line 1 of Phone: 2 dAtE       Type:  (todays) 6-digit date (in the form:
                                      mmddyy), then <END>
 Phone: Prog donE    Type:  <POWER>    

 The phone should now be correctly programmed. It is important to remember 
 that it will take a cellular carrier several hours to activate a cellular 
 phone number. 

Settings List:                                    Accessories:
<SEL> 1     Display Carrier Priority              17-504   PC/FAX Interface
<SEL> 11    Change Carrier Priority (A/B)         17-705     Wiring Harness
<SEL> 2         Enable/Disable Horn Alert                 (CT-102/103/104) 
<SEL> 3         Display Time of Last Call         17-704         Horn Alert
<SEL> 33    Display Call Timer Total                       (CT-102/103/104)
<SEL> 44    Enable/Disable Key Entry Tone         17-706  Handset Extension
<SEL> 5         Clear Call Timers                          (CT-102/103/104)
<SEL> 6         Change Auto-Shutoff Time          17-610    Battery Charger
<SEL> 7         Change Primary/Secondary NAM                      (CT-1033)
<SEL> 88    High/Low Power                      23-187 Rechargeable Battery
                                                                  (CT-1033)
                                                  T16-DV124 4500mAH Battery
                                                                  (CT-1033)
                                                  T16-DV127 7000mAH Battery