SETUP NOTES

These programs are used to change the BIOS setup of Tandy systems.  On most
non-Tandy systems, setup is entered by pressing a certain key combination
at boot time.  Tandy's do not work that way; to set them up, you run a
program from the DOS command line (there may also be a bootable setup
diskette, and some setups run under Windows, but there is always a DOS
version).

You need to make sure you get the right setup program for your system; some
of the older setups do not detect the system.  Check the model number,
printed on the back or bottom of the machine, as well as the BIOS version,
then read 00_index.txt to find the right file.

Not all 1000's *have* setup programs.  If your 1000-series system is not
listed in 00_index.txt, it doesn't have EEPROM or CMOS and uses jumpers and
switches on the motherboard for setup.  You can download documentation on
those from the official Tandy support site:

  http://support.radioshack.com/ProductInfo/

Most of these setup programs are also available at the official Tandy support
site:

  http://support.radioshack.com/setup.htm

Tandy also has setups for Grid systems; I don't have those.

If you have questions about setting up your Tandy, or your setup isn't here,
call Tandy customer support at 1-800-THE-SHACK.  NOTE: I am not, nor have I
ever been, associated with Tandy Corporation.