Notes
on the Xircom PE3 (Pocket Ethernet 3) The odd cable for the PE III adapters
takes the power from
the PS/2 port. This doesn't strike me as all that smart,
as the adapters
use from 300-600 mA. The TR models can't use the L40SX
mouse port, too
high of a power draw.
P3270 Pocket 3270 Adapter PA02B6-8K Pocket Arcnet Adapter ![]() PA-2 Pocket Arcnet II Adapter PE10Bx Pocket Ethernet Adapter ![]() PE2 Pocket Ethernet II Adapter PE3-10B2 Pocket Ethernet III Adapter ![]() PE3-10BT Pocket Ethernet III Adapter ![]() PEM-10BT
Pocket
Ethernet+Modem Adapter
PT3-16CTP Pocket Token Ring III Adapter ![]() Install PT3-16CTP
Install Phantom Power Cable
NOTE: The mouse port on the L40SX is NOT compatible with the phantom power cable. Install Wall-Mount AC Adapter
PTPS
Pocket
Token Ring Print Server
Xircom(R) Pocket Ethernet Adapter power supply specifications This applies to: Xircom(R) Pocket Ethernet II / III Adapter Below are the power requirements for our Pocket
Adapters:
pe2-10b2 uses ......500ma
Pe3-10b2 uses .........300 ma
An AC adapter putting out 500mA will usually work with
any of them.
|