Memory Allocations

To change the memory allocations:

1. Click the Start button, point to Settings and click Control Panel.
   
   
2. Double-click the System icon.
   
   
3. In the System Properties dialog box, click the Device Manager tab.
   
   
4. Double-click Sound, video and game controllers.
   
   
5. Click the Apocalypse card's entry in the Sound, video and game controllers list.
   
   
6. Click Properties.
   
   
7. Click the Resources tab.
   
   
8. Clear the Use automatic settings check box.
   
   
9. In the Resource settings list, double-click the first (top) Memory Range.
   
   
10. In the Value box of the Edit Memory dialog box, type in the range FFBE0000 - FFBEFFFF, and click OK.
    
    
11. In the Resource settings list, double-click the second (bottom) Memory Range.
    
    
12. In the Value box of the Edit Memory dialog box, type in the range FF400000 - FF7FFFFF, and click OK.
    
    
13. Click OK.
    
    
14. At the System Properties dialog box, click OK.
    
    
15. Restart your PC.

You should not have to reconfigure the memory settings again as Windows will remember the new settings every time it starts up and reallocate the memory automatically.

Memory Allocation Conflicts

The above steps assume that there is no memory allocation conflict due to devices present at the addresses you specified. To ensure there is no conflict, follow steps 1 to 7 above. If, in the Resources tab, the Conflicting devices list says ‘No conflicts.’, your Apocalypse card is ready to use. If a conflict is indicated, contact our technical support team through one of the methods given in the support page.