Radisys EXM Bus
Components
EMC - Embedded Modular Computer EPC - Embedded Personal Computer (EPC-21/22/23/24/26/26A/27) EXM - EXpansion Module Third-party add-in card vendors design and market additional types of EXM modules including motion controllers, Seriplex and Sercos controllers, and LonWorks interfaces. I have manuals for everything BUT the EXM-15/15A SERCOS controller. All files are in this directory. Not every file is linked. Some manuals date from 1992 (maybe 1990 on a few). So... they might be a bit outdated for modules made in the mid 1990s. Also, the version of Word used for the early manuals is Word 2.0, which is right out if you are using Word 2003. It requires adding a registry value to allow Word to open the old file.... EXM is a mix between ISA and VME. Thankfully, most modules act as ISA cards to any operating system. So you could probably install using common drivers and it should work. Most EXM do not have specific drivers, but there are a few based on old chips dating back to 1989 or so, and they may lack support from more modern operating systems. One EXM of note is the EXM-13A, based on the NCR / Symbios Logic 77C22E+... We do have Radisys drivers, but that chip is shrouded in mystery... NT4 does have ncr77c22.sys, which MIGHT work, but I do not know the color depth. NOTICE: I have NO personal experience with any Radisys EXM related system or components. All these files were retrieved via Internet Archive and were re-named to a shorter format. To me, there can only be one period in a file name, or you may get odd problems with web pages... Use of any of the files or information on this page is AT YOUR OWN RISK. If you want a guarantee on this stuff, seek out any repair / service company that supports EXM / EPC devices. If you have any files or experience with these devices, you can reach me HERE Radisys EXM Modules WARNING: Some EXM modules are incompatible with other modules or carriers. Please read the documentation from Radisys. Do NOT assume the EXM format module is compatible in your application! EXM-1 Ethernet Controller (?) AUI / BNC EXM-1 Manuals 01_v105 EXM-2 Flash Disk (Flash) EXM-2 Manuals 2_v104 EXM-2A Solid State Disk Module (Flash and SRAM) EXM-2A Manuals 2A_v100 EXM-3 Disk Controller (External Floppy and 50-pin SCSI controller) EXM-3 Manuals 3_v100 EXM-4 GPIB Interface Module (Single GPIB port) EXM-4 Manuals EXM-5 Modem (2400, 1200, and 300 bps) EXM-5 Manuals EXM-6 VGA video controller (WD Paradise VGA1A video controller) EXM-6 Manuals EXM-7 Dual RS-232 Module (two DB-9) EXM-7 Manuals EXM-8 Dual RS-422/485 Module (two DB-9) EXM-8 Manuals EXM-8 Files EXM-9 External IDE/Floppy Disk Controller (External Floppy IDC) - No manuals -OR- files EXM-10 Ethernet Controller AUI / BNC EXM-10 Manuals 10_WD_8003_Utils EXM-10A Ethernet Controller AUI / BNC / RJ45 EXM-10A Manuals 10A_DOS (?) EXM-11 Interval Timer (Two BNC inputs) EXM-11 Manuals EXM-12 Prototyping Module EXM-12 Manuals 12_v100 EXM-13 Models EXM-13 VGA video controller (WD WD90C11 video controller) EXM-13A True Color SVGA Controller (NCR 77C22E+ video controller) EXM-13B Super VGA Graphics Controller and Accelerator (CL-GD5434 ) EXM-14 Live Motion Video (used w/ EXM-13 / -13A. But -13B is probably compatible) EXM-14 Manuals 14_v101 EMX-15 SERCOS controller - No manuals -OR- files EMX-15A SERCOS controller DB9 test port and 2 fiber optic ports - No manuals -OR- files EXM-16 SCSI-II and Floppy Drive Controller (External Floppy HPDB50 SCSI port) EXM-16 Manuals 16_v304 (EZ-SCSI) EXM-17 PCMCIA Controller (Type I/II, double-wide Type III exists) EXM-17 Manuals 17_v100 EXM-18 Parallel/Serial Port Module (56K, 232 -OR- 422, parallel IN or OUT, not bi-di) EXM-18 Manuals EXM-19 Digital I/O Expansion Module (-24 24 I/O, -48, 48 I/O, 19-OPTO 24 I/O) EXM-19 Manuals 19_CUG342 EXM-20 A/D Converter Module (12-bit A-D, 8 DIFF / 16 SE inputs, 100 KHz max rate) EXM-20 Manuals 20_v102 EXM-21 Digital to Analog Output Module (dual 12-bit D/A) EXM-21 Manuals EXM-22 High Speed GPIB (VXI only, -22 R 350KB W 600KB -22+ R/W up to 1MB.) EXM-22 Manuals EXM-23 Flat Panel Video Controller EXM-23 Manuals EXM-24 Multiport Intelligent Serial I/O Controller (8 RS-232, up to 115.2K) EXM-24 Manuals EXM-25 Token Ring Adapter (TROPIC 16/4, DB9 and RJ45) EXM-25 Manuals 25_TR_Diag_v20 EXM-26 Multiport Serial I/O (4 -OR- 8 RS232/RS422) EXM-26 Manuals EXM-27 Encoder DB9 and DB15 - No manuals -OR- files EXM-28 Arcnet Controller (BNC -OR- two RJ-11) EXM-28 Manuals 28_v100 EXM-29 Dual Serial I/O (2 DB9 RS-422/-485 ports, FASTCOMM compatible) EXM-29 Manuals 29_v100 EXM-31 High Speed Modem (up to 14.4K modem and Fax) EXM-31 Manuals EXM-32 DeviceNet/CAN Controller (-32DN DeviceNet, -32CAN CAN) EXM-32 Manuals EXM-33 Counter/Timer EXM-33 Manuals EXM-34 Speech Synthesizer (two 3.5 mm jacks, volume control knob) EXM-34 Manuals 34_v100 EXM-37 VGA Controller (CL-GD5434 or better, HDD15, Flat Panel Feature Connector) EXM-37 Manuals EXM-SSD Solid State Disk Drive (IDE controller / SSD, FDC, external floppy port) EXM-SSD Manuals EXM-HD Mass Storage Module (IDE controller / IDE drive) EXM-HD Manuals EXM-MX Mass Storage Module (IDE controller / IDE drive, FDC, external floppy port) EXM-MX Manuals Radisys EXM Compatible Modules / Devices EMC-FDM (FDC, floppy, DB9 serial, DB25 parallel) EMC-FDM Manuals WD37C65CJM Limited to 500Kb/s data rate by 16.0 MHz osc? Supports power down mode feature, standby ICC = 100 uA max. TL16C552FN LT1133CS FPX16 Parallel port direction is OUTPUT for printing -OR- INPUT for scanners. Maybe. The TL16552FN is capable of Bi-Di, so this might be OUTPUT for compatible, INPUT for Bi-Directional (PS/2). Parallel Port can use 378h / Int7 (LPT1?) or 278h / Int5, or disabled. COM port can use 2F8h, 3F8h, or 2E8h. IRQ 3, 4, or 9. NOTE: Only one floppy drive controller per system can be enabled at any one time. If the EMC system requires an EXM-16 or an EXM-MX running with the EXM-FDM, disable all but one floppy drive Port Conflicts Avoid interrupt and address conflicts due to multiple serial or parallel ports with the same address or interrupt. Be sure to either disable unused serial or parallel ports, or set them to a value that does not conflict with other ports in the system. Note that in general attaching a mouse to a serial port only works on COM1 or COM2. EMC-PS50 Power Supply (fits outside of EXM chassis 115/230v) EXM-PS50 Power Supply (fits INSIDE of EXM slot! -DC12, -DC24, -DC48) EMC-BP8 8 position EXM base EMC-BP12 12 position EXM base EMC-CC4 Chassis 4 EXM slot EMC-CC6 Chassis 6 EXM slot EMC-CC8 Chassis 8 EXM slot EMC-CH10 Dual Power Supply chassis EPC chassis with EXM slots: WARNING: Some EPC chassis are incompatible with other modules or carriers. Please read the documentation from Radisys. Do NOT assume the EPC chassis is compatible in your application! EPC-4 VMEbus embedded CPU module , 2 EXM slots EPC-5 VMEbus embedded CPU module , 2 EXM slots EPC-1005 (formerly EPC-5A) EPC-6 VMEbus Controller, 1 EXM slot EPC-7 VXIbus embedded CPU module, 3 -OR- 4 EXM slots EPC-8 VME/VXIbus embedded CPU module, 2 slot model has 2 EXM slots EPC-1008 (formerly EPC-8A) Other Places Universal Instruments Pacific Scientific HP Keysight / Agilent |